Ụlọ ọrụ igwe na-egwupụta ihe na-agwụ ike nke China
Nkọwa ngwaahịa
Nke a igwe na-pụrụ iche e mere maka miri oghere nhazi nke cylindrical workpiece, ọ nwere ike ịrụ dị iche iche nhazi, dị ka mkpọpu ala, na-agwụ ike, ịgbasa na ala Burnishing, wdg E wezụga machining site-oghere, ọ nwekwara ike hazie nzọụkwụ onu na kpuru oghere.
Usoro adopts mode nke workpiece adiana na ngwaọrụ nri, ma ọ bụrụ na ọ dị mkpa na ngwá ọrụ nwekwara ike ịbụ rotary.Na workpiece na-atụgharị na nri ngwá ọrụ, mmiri mmiri na-erute ebe a na-egbutu site na ngwaọrụ ọkọnọ mmanụ ma ọ bụ site na njedebe mmanya na-agwụ ike, nkwụsị mgbawa na-anabata ụdị BTA.Mgbe ọ na-agwụ ike, mmiri mmiri na-egbutu na-ebupụ ibe n'ihu site na njedebe isi.
Iji gboo mkpa nhazi dị iche iche, igwe nwere ike kwadebere ya na igbe mkpọ ala, na-enweta ntụgharị abụọ nke workpiece na ngwaọrụ, yana otu ihe ahụ dịkwa.N'okpuru ọnọdụ nke obere ntụgharị ọsọ ọsọ nke workpiece, nhazi nhazi na ịdị mma nwere ike ijide n'aka.
Igwe a nwere ngwa obosara dịka achọrọ nhazi dị iche iche.
Igwe ahụ mejupụtara ahụ bed, headstock, ọkpọ ọkpọ (nhọrọ), chuck body, carriage feed system, mmanụ feeder, jụrụ oyi, ngwaọrụ iwepụ ibe, izu ike kwụ ọtọ, hydraulic usoro, na-agwụ ike mmanya nkwado, moto ngwaọrụ na eletriki akara usoro, wdg .
Nkọwapụta
| NO | Ihe | Nkọwa |
|
| 1 | Usoro ihe nlereanya igwe | T2235 | T2135 |
| 2 | Dayameta nke mkpọ ala ruru | / | Φ30-80mm |
| 3 | Dayameta na-agwụ ike | Φ60-350mm | Φ60-350mm |
| 4 | Omimi na-agwụ ike | 1-12m | 1-12m |
| 5 | Oke njigide ihe ndozi | Φ120-450mm | Φ120-450mm |
| 6 | Igwe spindle etiti ịdị elu | 450mm | 450mm |
| 7 | Ọsọ spindle headstock | 61-1000 r/m, ọkwa 12 | 61-1000 r/m, ọkwa 12 |
| 8 | Dayameta oghere Spindle | Φ75mm | Φ75mm |
| 9 | Spindle n'ihu taper oghere dayameta | Φ85mm (1:20) | Φ85mm (1:20) |
| 10 | Isi moto | 30kw | 30kw |
| 11 | Oke ọsọ inye nri | 5-2000mm / min stepless | 5-2000mm / min stepless |
| 12 | Ịnya ụgbọ nri ngwa ngwa | 2m/min | 2m/min |
| 13 | Nye ike moto | 36N.M | 36N.M |
| 14 | Ịnya ụgbọ ibu ngwa ngwa ike moto | 3KW | 3KW |
| 15 | Oke.ike axial nke feeder mmanụ | 6.3KN | 6.3KN |
| 16 | Max.mkpọchi ike nke mmanụ nri | 20KN | 20KN |
| 17 | Ike igwe mgbapụta hydraulic | 1.5KW | 1.5KW |
| 18 | Sistemụ hydraulic gosipụtara nrụgide ọrụ | 6.3 Mpa | 6.3 Mpa |
| 19 | Igwe mgbapụta oyi oyi | N=5.5kw ( otu anọ) | N=5.5kw ( otu anọ) |
| 20 | Sistemu jụrụ nrụgide gosiri | 2.5Mpa | 2.5Mpa |
| 21 | Ntugharị sistemu jụrụ oyi | 100, 200, 300, 400 L / min | 100, 200, 300, 400 L / min |
| 22 | Usoro njikwa | Siemens 808 ma ọ bụ KND | Siemens 808 ma ọ bụ KND |
Mgbidi foto
